-
With supported speeds of up to 24 Gb/s, this Supports PCIe Gen 3 & 4 and SAS Gen 3, and will accommodate future SAS Gen 4. *Passive ONLY*. 12G HD External SAS -> OCuLink 4-Lane 4-Lane -> 4-Lane SFF-8644 -> SFF-8611 -
With supported speeds of up to 24 Gb/s, this Supports PCIe Gen 3 & 4 and SAS Gen 3, and will accommodate future SAS Gen 4. *Passive ONLY*. 12G HD Internal SAS -> OCuLink 4-Lane 4-Lane -> 4-Lane SFF-8643 -> SFF-8611 -
12X to 12X Infiniband Cable – w/ ‘Pull Latch’ -
12X to 12X Infiniband Cable – w/ Thumb Screw -
Infiniband promises to provide the fastest transfer rates available for copper cable. 2.5Gb/s speeds per channel aggregates to 10Gb/s on a 4X cable and 30Gb/s on a 12x cable. -
Infiniband promises to provide the fastest transfer rates available for copper cable. 2.5Gb/s speeds per channel aggregates to 10Gb/s on a 4X cable and 30Gb/s on a 12x cable -
4X – 4X Infiniband “Pull Latch” also available -
4X to Quad 1X Infiniband Cable -
CX4 cables are assembled with premium Madison 8 pair, 100 ohm cable, and are available in lengths up to 15 meters. Standard connector type is the “pull” ejector style latch used for Infiniband SFF-8470, but configurations with side squeeze latches or thumbscrews are also available. CX4 High Performance Cable Assemblies, part of the 10Gb Ethernet standard, provide superior signal fidelity over long distances using the smallest, most flexible cable. The assemblies are engineered to be compliant with the IEEE Draft P802.3ak/D5.3 specification. Cable assemblies for CX4 are tested to a higher test standard than are InfiniBand cables. Therefore, CX4 cables are backwards compatible to Infinband, but Infiniband cables do not necessarily meet CX4 test standards. -
CX4 10Gb/s Ethernet Cable – ‘Squeeze’ Latch CX4 cables are assembled with premium Madison 8 pair, 100 ohm cable, and are available in lengths up to 15 meters. Standard connector type is the “pull” ejector style latch used for Infiniband SFF-8470, but configurations with side squeeze latches or thumbscrews are also available. CX4 High Performance Cable Assemblies, part of the 10Gb Ethernet standard, provide superior signal fidelity over long distances using the smallest, most flexible cable. The assemblies are engineered to be compliant with the IEEE Draft P802.3ak/D5.3 specification. Cable assemblies for CX4 are tested to a higher test standard than are InfiniBand cables. Therefore, CX4 cables are backwards compatible to Infinband, but Infiniband cables do not necessarily meet CX4 test standards. -
Quad Small Form-factor pluggable (QSFP+) QSFP+ cables provide a high density, high bandwidth, cost effective solution for a variety of markets and applications including switches, routers, HBA’s, high performance computing and mass storage sub-systems by mfr’s such as IBM, Cisco, qLogic, etc. QSFP+ cables are designed for data rates up to 40Gb/s supporting Fibre Channel, Ethernet, SDH/SONET and Infiniband standards. Product Features:- Supports Infiniband, QDR, DDR, CX4, Fibre Channel and SAS applications
- Up to 10Gb/s transfer rate per channel (40Gb/s aggregate)
- Zinc die-cast QSFP connectors with pull-to-release latching
- 3x the port density of standard SFP products
- Reduced power and lower port cost compared to optical
- Low cross-talk and pair-to-pair skew
- Fully compliant to QSFP MSA
- Supports 10-Gigabit Ethernet and future 40-Gigabit Ethernet standards
- RoHS Compliant
-
Quad Small Form-factor pluggable (QSFP+) QSFP+ cables provide a high density, high bandwidth, cost effective solution for a variety of markets and applications including switches, routers, HBA’s, high performance computing and mass storage sub-systems by mfr’s such as IBM, Cisco, qLogic, etc. QSFP+ cables are designed for data rates up to 40Gb/s supporting Fibre Channel, Ethernet, SDH/SONET and Infiniband standards. Product Features:- Supports Infiniband, QDR, DDR, CX4, Fibre Channel and SAS applications
- Up to 10Gb/s transfer rate per channel (40Gb/s aggregate)
- Zinc die-cast QSFP connectors with pull-to-release latching
- 3x the port density of standard SFP products
- Reduced power and lower port cost compared to optical
- Low cross-talk and pair-to-pair skew
- Fully compliant to QSFP MSA
- Supports 10-Gigabit Ethernet and future 40-Gigabit Ethernet standards
- RoHS Compliant
-
Quad Small Form-factor pluggable (QSFP+) QSFP+ cables provide a high density, high bandwidth, cost effective solution for a variety of markets and applications including switches, routers, HBA’s, high performance computing and mass storage sub-systems by mfr’s such as IBM, Cisco, qLogic, etc. QSFP+ cables are designed for data rates up to 40Gb/s supporting Fibre Channel, Ethernet, SDH/SONET and Infiniband standards. Product Features:- Supports Infiniband, QDR, DDR, CX4, Fibre Channel and SAS applications
- Up to 10Gb/s transfer rate per channel (40Gb/s aggregate)
- Zinc die-cast QSFP connectors with pull-to-release latching
- 3x the port density of standard SFP products
- Reduced power and lower port cost compared to optical
- Low cross-talk and pair-to-pair skew
- Fully compliant to QSFP MSA
- Supports 10-Gigabit Ethernet and future 40-Gigabit Ethernet standards
- RoHS Compliant
-
Quad Small Form-factor pluggable (QSFP+) QSFP+ cables provide a high density, high bandwidth, cost effective solution for a variety of markets and applications including switches, routers, HBA’s, high performance computing and mass storage sub-systems by mfr’s such as IBM, Cisco, qLogic, etc. QSFP+ cables are designed for data rates up to 40Gb/s supporting Fibre Channel, Ethernet, SDH/SONET and Infiniband standards. Product Features:- Supports Infiniband, QDR, DDR, CX4, Fibre Channel and SAS applications
- Up to 10Gb/s transfer rate per channel (40Gb/s aggregate)
- Zinc die-cast QSFP connectors with pull-to-release latching
- 3x the port density of standard SFP products
- Reduced power and lower port cost compared to optical
- Low cross-talk and pair-to-pair skew
- Fully compliant to QSFP MSA
- Supports 10-Gigabit Ethernet and future 40-Gigabit Ethernet standards
- RoHS Compliant
-
(SFF-8611 → (2)SFF-8644 ) -
With supported speeds of up to 24 Gb/s, this Supports PCIe Gen 3 & 4 and SAS Gen 3, and will accommodate future SAS Gen 4. *Passive ONLY*. OCuLink -> (2)OCuLink 4-Lane -> (2) 2-Lane SFF-8611 -> (2) SFF-8611 -
With supported speeds of up to 24 Gb/s, this Supports PCIe Gen 3 & 4 and SAS Gen 3, and will accommodate future SAS Gen 4. *Passive ONLY*. OCuLink -> (4)OCuLink 4-Lane -> (4) 1-Lane SFF-8611 -> (4) SFF-8611 -
With supported speeds of up to 24 Gb/s, this Supports PCIe Gen 3 & 4 and SAS Gen 3, and will accommodate future SAS Gen 4. *Passive ONLY*. OCuLink -> OCuLink 4-Lane -> 4-Lane SFF-8611 -> SFF-8611 -
With supported speeds of up to 24 Gb/s, this Supports PCIe Gen 3 & 4 and SAS Gen 3, and will accommodate future SAS Gen 4. *Passive ONLY*. OCuLink -> PCIe / SAS 4-Lane w/Power 4-Lane -> 4-Lane SFF-8611 -> SFF-8639 -
Kit includes PCIe Adapter Board w/ SFF-8639 (U.2) connection to drive, and a 12G-rated HD SAS-style Cable to connect to PCIe Host or Mother Board *Requires Host or Mother Board w/ SFF-8643 Connection that supports PCI Express -
Has U.2 (SFF-8639) interface and 15-pin power connector on drive end – and SFF-8643 (SAS-style) connector to connect to Host. (12G-rated) For 2.5″ PCIe x4 3.0 (Gen3) Solid State Drives *Must connect to power supply w/ 5v, 12v, and 3.3v power sources Also available w/ ‘mounting ears’ for integration into drive enclosures -
Male -to- Female PCIe SFF-8639 (U.2) Extender cable 12G-Rated Click here for PCIe-8639M-F_.5m specs Click here for PCIe-8639 M-F_1m specs SKU: PCIe-8639-M-F Categories: PCIe Cables, PCIe Products
