-
Frequency: N/A Mode: Copper Speed: 1.25 Gb/s Distance: 100m *Available only in 1.25Gb/s version. -
Frequency: N/A Mode: Copper Speed: N/A Pluggable SFP module for 1000BASE-T Gigabit Ethernet RJ-45 interfaces. Provides a high performance integrated duplex data link for bi-directional communication over CAT-5 cabling. -
Freq: 850nm | Mode: multimode | Speed: 10 Gb/s | Distance: 300m Small form-factor pluggable Multimode module for LC Optical interface. Works for 10 Gigabit Ethernet or 10x FC. -
Small form-factor pluggable Single Mode module for LC Optical interface. Works for 10x FC or 10 Gigabit Ethernet. 10Gb/s LC Optical XFP Transceivers XFP-14M3 / FTRX1411M3 (10.7Gb/s) also supports SONET 0C-192 XFP-14D3 / FTRX1411D3 (10.5Gb/s) supports the 10X Fibre Channel Standard For 10GigE “Short Wave” (850nm) versions, please call for price and availability -
*Comes as a “stand-alone” board. See FIBRE CHANNEL CABLES for internal cables for this unit. 2 Gbs Single-Drive “Low-Profile” FC Adapter 1” Form Factor- This latest adapter has two independent FC-AL ports, each capable of 1062 MHz encoded data rate @ 2.125 gigabaud.
- On-board Port Bypass Circuit (PBC) for convenient Hot Swappability of drive.
- FC Coax Cable Driver implemented with high-speed ECL logic to drive long cable lengths.
- <10ps jitter on FC input receiver and controlled impedance pcb for multiple interconnects.
- Dimension: 1.03” x 3.80”
- FCA-2200-K
-
3-pin PTP Internal Cable For internal jumpering on devices with the 3-pin PTP connectors -
- This drive adapter (interposer) supports 2 FC data channels @ 4gb/s.
- (2) SFP ports for access by SFP transceiver (GBC-4400) and optical cable or use an SFP copper cable (see Fibre Channel Cables).
- 40-pin SCA connection for plugging directly onto drive.
- 4-pin power plug and jumpers provided.
- This board does not support “loop resiliency.”
- Dimension: 2.60” x 4.25”.
-
w/ Bracket to mount in Centronics50 cut-out *works in conjunction w/ FCA-2200K to provide SFP Optical output for longer length connections. *Comes with power cable as pictured. -
DB9 Female – 3-pin PTP “Y” Cable CSE offers custom configurations and lengths of Fibre Channel cables. All cables are made with either Madison “Turbo-Quad Gold” (for 2gb/s), or “Turbo 100” for SFP-SFP cables. We can provide “Quick-Turn” deliveries, even on custom cables! -
DB9 Female – 3-pin PTP “Y” Cable w/ Power Connection Connects Tx and Rx lines from DB9f to (2) PTP connectors, supplies +5v to DB9 for MIA support. -
DB9 Female – DB9 Male Fibre Channel Cables This design is the latest innovation in high-speed copper cabling for Fibre Channel and Infiniband. It incorporates the SFP module directly onto the cable assembly, eliminating the need for a separate SFP copper module (GBC-6000) and an HSSDC2 cable assembly. *Supports Fibre Channel data rates to 2.125Gb/s, and Infiniband and Gigabit Ethernet to 2.5Gb/s *Hot pluggable, with Serial ID *Operates on either single 3.3V or 5V power -
DB9 Male – DB9 Male Fibre Channel Cables This design is the latest innovation in high-speed copper cabling for Fibre Channel and Infiniband. It incorporates the SFP module directly onto the cable assembly, eliminating the need for a separate SFP copper module (GBC-6000) and an HSSDC2 cable assembly. *Supports Fibre Channel data rates to 2.125Gb/s, and Infiniband and Gigabit Ethernet to 2.5Gb/s *Hot pluggable, with Serial ID *Operates on either single 3.3V or 5V power -
Utilizes a custom-designed “impedance-matched” internal pc board for “looping-back” Tx & Rx signals. -
Frequency: 850nm Mode: Multiple Speed: >10Gb/s Distance: <300m Ideal for Mid-Distance LAN Backbones (e.q. 10GBASE-SX), SAN's and Central Office connection -
Frequency: 1310nm Mode: Single Speed: >10Gb/s Distance: <10km For long distance Single Mode applications up to 10km -
Length: 12″ (.3m) Made with Madison “Turbo Quad Gold” for 2gbs Fibre Channel. -
HSSDC – 3-pin PTP “Y” Cable Connects Tx and Rx lines from HSSDC to (2) PTP connectors. -
HSSDC – 3-pin PTP “Y” Cable w/ Power Connection Connects Tx and Rx lines from HSSDC to (2) PTP connectors, supplies +5v to HSSDC for MIA support. -
HSSDC – DB9 Female 8-wire MIA Adapter Cable For externally adapting an HSSDC female panel connection to DB9 female for an MIA Copper-to-Optical adapter. -
HSSDC – DB9 Male Fibre Channel Cables This design is the latest innovation in high-speed copper cabling for Fibre Channel and Infiniband. It incorporates the SFP module directly onto the cable assembly, eliminating the need for a separate SFP copper module (GBC-6000) and an HSSDC2 cable assembly. *Supports Fibre Channel data rates to 2.125Gb/s, and Infiniband and Gigabit Ethernet to 2.5Gb/s *Hot pluggable, with Serial ID *Operates on either single 3.3V or 5V power -
Length: 15″ (.38m) Converts device with HSSDC to a HSSDC female, supplies +5v for MIA support. *This cable was designed to enable a conversion from Copper to OPTICAL for devices supplied with only an HSSDC connection. By connecting an MIA-4000 to the HSSDC female, you can convert from a copper interface (with limited length) to almost unlimited length Fiber Optic interface. Made with Madison “Turbo Quad Gold” for 2gbs Fibre Channel. -
HSSDC – HSSDC Fibre Channel Cables This design is the latest innovation in high-speed copper cabling for Fibre Channel and Infiniband. It incorporates the SFP module directly onto the cable assembly, eliminating the need for a separate SFP copper module (GBC-6000) and an HSSDC2 cable assembly. *Supports Fibre Channel data rates to 2.125Gb/s, and Infiniband and Gigabit Ethernet to 2.5Gb/s *Hot pluggable, with Serial ID *Operates on either single 3.3V or 5V power
