-
6Gb/s – Rated SATA Cable. 7-pin SATA 6G rated. -
*Drive “combo” connector has the same connector as a SATA drive – plugs into SATA backplane. Used for system analysis, test, etc. SATA Backplane ‘Test’ Cable – Male 22-pin -to- 7-pin SATA & Power Part#’s SATA-3005 / SATA-3010 -
SAS Drive Adapter – 2.5″ Form-Factor – Dual Ported – Hot Swap ADP-4200 is the latest addition to our line of SAS drive backplane adapters. It measures .6” high and 2.76” wide for high-density drive arrays, and easily mounts to your hardware for Hot-Swapping of 2.5” Drives. The 29-pin drive “docking” connector and (2) 7-Pin Signal connectors (for redundant SAS host applications) provides an ideal mounting platform for SAS and SATA Drives. Standard power connector provides +12V and +5V (Optional 3.3V). -
Can either plug directly into drive's Signal connector, or into Signal port of our drive adapter (ADP-3800/3900), then connects to Signal port of Host Adapter. SATA Cable – 7-pin SATA Connector both ends -
SATA Power Cable – Drive power to Standard 4-pin power Plugs directly into drive’s Power connector, and connects to standard 4-pin power source connector. -
SATA Single-Drive Mountable Drive Adapter w/ “Hot-Swapping” Circuitry Designed as a “stand-alone” adapter, or able to be incorporated into a multi-drive, docking array or RAID system. *Comes standard with “low profile” drive docking connector. For “extended height” docking connector, order ADP-3800E -
Serial ATA Cable Coupler Male – Male -
Combo connector plugs directly into drive's Signal/Power connector, and breaks out to separate Signal and Power connectors. Serial ATA Drive Cables – 7-pin straight to R/A 7-pin ‘Down’ -
Serial ATA Signal Cable – 7-pin straight to R/A 7-pin ‘Up’ -
Serial ATA Signal Cable – R/A 7-pin ‘Down’ to R/A 7-pin ‘Down’ -
Can either plug directly into drive's Signal connector, or into Signal port of our drive adapter (ADP-3800/3900), then connects to Signal port of Host Adapter. Serial ATA Signal Cable – R/A 7-pin ‘Up’ to R/A 7-pin ‘Up’ -
Shielded SATA cable w/ metal connector face. -
SAS-7P82-1/xm Wiring Diagram Single Port Host Based 7-Pin SATA TO Target Based 29-Pin Drive Receptacle w/ 6″ Pwr Lead Note: Power Lead is .15m( ~6″), regardless of Signal cable length. Optional lengths available Single Port Host Based SATA 7-Pin to SFF-8482 Target Based 29-Pin Drive Receptacle w/ 6″ Pwr Lead Serial Attached SCSI (SAS) Cables SAS is the next-generation interface standard for SCSI-based systems, designed to replace the SCSI parallel interface with much faster, more flexible, 3Gb/s Serial Interface while maintaining the robust nature of the SCSI Command Set. “Mini-SAS” (“CSE iSAS”), is the next generation of SAS Cables. It uses smaller connectors with improved performance and 6Gb/s Rated. They are now used on many new Controllers and Backplanes being shipped today. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS Expanders, Host Bus Adapters (HBA’s) and RAID controllers.
